manualshive.com logo in svg

Rohde & Schwarz SMM100A, User Manual

Share
Download
Rohde & Schwarz SMM100A User Manual Download Page 172

Configuring the internal baseband source

R&S

®

SMM100A

172

User Manual 1179.1341.02 ─ 05

To define periodical marker trace

The waveform in the example on 

Figure 4-16

 consists of 3 frames, each frame is 100-

samples long. The waveform is processed continuously ("Trigger Mode > Auto").

Figure 4-16: Example: Defining marker traces (CONTROL LENGTH tag is not used)

To define a restart marker and a frame start marker, use the following tags:

1. The waveform is 300 samples long, i.e. set 

{SAMPLES: 300}

.

2. Set two 

[TRACE] LIST

 tags:

● For Marker 1 that acts as a restart marker:

{MARKER LIST 1: 0:1; 10:0; 299:0}

● For Marker 2 that marks each frame start:

{MARKER LIST 2: 0:1; 10:0; 99:0}

3. Do not use the 

CONTROL LENGTH

 tag.

The length of the repeated patterns is determined by the last sample number in the

[TRACE] LIST

, that is the last {

Pos:

State} .

Using the arbitrary waveform generator (ARB)

Summary of Contents for SMM100A

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands