Rohde & Schwarz SMF-B1, Operating Manual

Page: 524 / 653

Remote Control Commands
R&S
®
SMF100A
509 Operating Manual 1167.2319.02 ─ 12
Parameters:
<Decimal> DOT | COMMa
*RST:
DOT
Example: see
[:SOURce<hw>]:LIST:DEXChange:AFILe:
SEParator:COLumn
on page 508
Manual operation: See " Decimal Point - List Mode " on page 177
[:SOURce<hw>]:LIST:DEXChange:EXECute
Executes the import or export of the selected list file, according to the previously set
transfer direction with command
[:SOURce<hw>]:LIST:DEXChange:MODE
.
Example: LIST:DEXC:MODE IMP
determines that ASCII files with frequency and level value pairs
are imported into list mode lists.
LIST:DEXC:AFIL:SEL '/var/list.csv'
selects the ASCII file
list.csv
for import.
LIST:DEXC:SEL '/var/list_imp'
determines the destination file
list_imp
.
LIST:DEXC:EXEC
imports the ASCII file data into the list mode file.
Usage: Event
Manual operation: See " Import / Export - List Mode " on page 178
[:SOURce<hw>]:LIST:DEXChange:MODE <Mode>
Selects if list mode lists should be imported or exported. Depending on the selection
here, the file select command defines either the source or the destination for list mode
lists and ASCII files.
Parameters:
<Mode> IMPort | EXPort
*RST:
IMPort
Example: LIST:DEXC:MODE IMP
selects that ASCII files with frequency and level value pairs are
imported and transferred into list mode lists.
LIST:DEXC:AFIL:SEL '/var/list.csv'
selects that ASCII file
list.csv
is imported.
LIST:DEXC:SEL '/var/list_imp'
selects that the ASCII file
list.csv
is imported into list mode
list
list_imp
.
Manual operation: See " Mode - List Mode " on page 177
[:SOURce<hw>]:LIST:DEXChange:SELect <Filename>
Selects the list mode list to be imported or exported.
SOURce Subsystem