Remote Control Commands
R&S
®
SMF100A
367
Operating Manual 1167.2319.02 ─ 12
Usage:
Event
Manual operation:
See
:HCOPy:FILE[:NAME]
<Name>
Creates/selects a file into which the hardcopy is stored.
The path is specified together with the filename. Access to the file via remote control is
possible using the commands of the
MMEM
subsystem. In contrast, command
HCOPy:DATA?
transfers the hardcopy contents directly to the remote client where they
can be further processed.
If automatic file naming is activated, the hardcopy is stored into a file with an automati-
cally generated name (commands
HCOPY:FILE[:NAME]:AUTO:…
).
Parameters:
<Name>
string
Example:
HCOP:FILE:NAME '/usb/HCopy'
Defines the hardcopy filename.
Manual operation:
See
:HCOPy:FILE[:NAME]:AUTO?
Queries the path including the filename of the file with automatically generated name.
Return values:
<Auto>
string
Example:
See
Usage:
Query only
Manual operation:
See
:HCOPy:FILE[:NAME]:AUTO:DIRectory
<Directory>
Sets the directory into which the hardcopy files are stored if auto naming is activated
(
HCOP:FILE:AUTO:STAT ON
).The directory is created if it does not exist yet.
Parameters:
<Directory>
string
*RST:
.\HCopy
Example:
HCOP:FILE:AUTO:DIR '/usb/'
Defines the destination directory '/usb/'
Manual operation:
See
HCOPy Subsystem