Remote Control Commands
R&S
®
SMF100A
362
Operating Manual 1167.2319.02 ─ 12
:DISPlay:DIALog:CLOSe:ALL
Closes all open dialogs.
Example:
DISP:DIAL:CLOS:ALL
Usage:
Event
:DISPlay:DIALog:ID?
Returns the dialog identifiers of the open dialogs in a string separated by blanks.
Return values:
<DialogIdList>
string
Example:
DISP:DIAL:ID?
Response:
"<dialog ID(1)> <dialog ID(2)> ...
<dialog ID(n)>"
Returns the dialog identifiers of all opened dialogs.
Usage:
Query only
:DISPlay:DIALog:OPEN
<DialogId>
Opens the specified dialog. To determine the dialog identifier, use command
.
Setting parameters:
<DialogId>
string
Example:
DISP:DIAL:OPEN "<dialog ID>"
Opens the dialog, determined with the "<dialog ID>".
Usage:
Setting only
:DISPlay:PSAVe:HOLDoff
<HoldoffTimeMin>
Sets the waiting time for the screen-save mode of the display.
Parameters:
<HoldoffTimeMin>
integer
Range:
1 to 60
*RST:
10
Default unit: minute
Example:
DISP:PSAV:HOLD 8
Sets the timeout of the screen saver to 8 minutes.
Manual operation:
See
:DISPlay:PSAVe[:STATe]
<State>
Activates the screen-save mode of the display.
DISPlay Subsystem