Maintenance
R&S
®
SMBV100B
940
User Manual 1178.4460.02 ─ 03
Install
Install all available updates for the FPGA/µC.
Remote command:
n.a.
Shut down
For at least one assembly "State = Done" and no pending assemblies, shuts the instru-
ment down to applies installed updates.
Remote command:
13.3.8
Delete Temporary Files
During signal processing, the R&S
SMBV100B creates and stores different temporary
files, such as the waveform files (
*.wv
) of all ARB standards. The instrument stores
these temporary files on a predefined directory on its internal memory and, if available,
on the Non-Volatile Memory. This predefined directory is a protected system directory
that is not accessible via the "File Manager" but you can delete all temporary files
stored there.
To achieve more free disc space on the internal memory
1. Select "System Config > Setup > Maintenance > Delete Temporary Files".
2. Select "Delete Temporary Files".
The content of the predefined directory is deleted.
Another way to achieve more free disc space on the internal memory is to use the
.
This function removes all temporary files, too, but also resets several parameters to
their factory preset values.
Remote command:
:SYSTem:FILes:TEMPorary:DELete
Performing Maintenance Tasks
