Rohde & Schwarz SMBV100B, User Manual

Page: 594 / 1030

Network Operation and Remote Control
R&S
®
SMBV100B
592 User Manual 1178.4460.02 ─ 03
11.11.2 Displaying an SCPI List
The instrument displays a recorded SCPI list and thus provides viewing the recorded
results before exporting.
► Depending on the starting point, you can access the "SCPI Recording List" dialog
as follows:
● During recording
Select "Show SCPI Recording List" in the context-sensitive menu.
● At any time outside recording
Select "Show SCPI Recording List" in the context-sensitive menu.
This function assumes that at least one recording has been executed after
power-on.
● At the end of the recording
Select "Stop automatic SCPI recording". The dialog opens automatically.
● After you have exported the script to a file.
Select "SCPI Recording Export > Show file content"
See
Chapter 11.11.3, "SCPI Recording Export Settings" , on page 592.
The "SCPI Recording List" shows the last recorded and exported commands.
SCPI Recording List
Lists the automatically or manually recorded recorded SCPI commands.
Export
Opens the SCPI Recording Export dialog for configuring the file parameters for export.
Remove All, Remove First, Remove Last
Deletes either the first, the last or all recorded SCPI commands.
To remove several recorded commands, repeat the removing.
For post processing, export the SCPI command list in a file, see Chapter 11.15, "How
to Convert and Save SCPI Lists" , on page 598.
11.11.3 SCPI Recording Export Settings
Scripts are configured and saved in the "SCPI Recording Export" dialog. This dialog
opens automatically, when you stop recording.
Automating Tasks with Remote Command Scripts