manualshive.com logo in svg

Rohde & Schwarz SMBV100A, Operating Manual

Share
Download
Rohde & Schwarz SMBV100A Operating Manual Download Page 583

Remote Control Commands

R&S

®

SMBV100A

568

Operating Manual 1176.8016.02 ─ 17

Usage: 

Query only

Manual operation: 

See 

"Directory, File List and File Name"

 

on page 161

:MMEMory:CATalog:LENGth? 

<Path>

Returns the number of files in the current or in the specified directory.

Query parameters: 

<Path>

string
String parameter to specify the directory. If the directory is omit-
ted, the command queries the content of the current directory,
queried with 

:MMEMory:CDIRectory

 command.

Return values: 

<FileCount>

integer
Number of files.

Example: 

See 

"Working with Files and Directories"

 

on page 566.

Usage: 

Query only

:MMEMory:CDIRectory 

<Directory>

Changes the default directory for mass memory storage. The directory is used for all
subsequent 

MMEM

 commands if no path is specified with them.

Parameters:

<Directory>

<directory_name>
String containing the path to another directory. The path can be
relative or absolute.
To change to a higher directory, use two dots '..' .

Example: 

See 

"Working with Files and Directories"

 

on page 566.

Usage: 

SCPI confirmed

Manual operation: 

See 

"Directory, File List and File Name"

 

on page 161

:MMEMory:COPY 

<SourceFile>[,<DestinationFile>]

Copies an existing file to a new file. Instead of just a file, this command can also be
used to copy a complete directory together with all its files.

Setting parameters: 

<SourceFile>

string
String containing the path and file name of the source file

MMEMory Subsystem

Summary of Contents for SMBV100A
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands