Rohde & Schwarz SMBV-P101, User Manual, Page: 75 / 131

Remote-Control Commands
R&S
®
SMBV-P101
60 User Manual 1176.9787.02 ─ 05
Parameters:
<RfBand> L1 | L2
*RST:
L1
Manual operation: See "RF Band" on page 20
[:SOURce<hw>]:BB:GNPR:PRFFrequency
Sets the "Status Bar > Frequency" display to the resulting frequency.
Usage: Event
Manual operation: See "Update RF Frequency" on page 20
[:SOURce<hw>]:BB:GNPR:SETTing:CATalog?
Reads out the files with GNSS production settings in the default directory, set with the
command
MMEM:CDIRectory
.
Listed are files with the file extension
*.gnss_prod
.
Usage: Query only
Manual operation: See "Save/Recall" on page 19
[:SOURce<hw>]:BB:GNPR:SETTing:DELete <Filename>
Deletes the selected file with GNSS settings.
Setting parameters:
<Filename> string
Usage: Setting only
Manual operation: See "Save/Recall" on page 19
[:SOURce<hw>]:BB:GNPR:SETTing:LOAD <Filename>
Loads the selected file with GNSS settings form the directory set with the command
MMEM:CDIRectory
. A path can also be specified, in which case files in the specified
directory are read.
Loaded are files with the file extension
*.gnss_prod
.
Setting parameters:
<Filename> string
Usage: Setting only
Manual operation: See "Save/Recall" on page 19
Primary Settings