Rohde & Schwarz SMBV-P101, User Manual, Page: 34 / 131

GNSS Production Configuration and Settings
R&S
®
SMBV-P101
19 User Manual 1176.9787.02 ─ 05
Parameter Value
Data Source All 0 (GPS, BeiDou)/Zero oder Real Navigation Data
(GLONASS)
System Time GPS
Satellite configuration
Maximum Number of Satellites 4
State satellite 1-4 On
Standard GPS, Galileo, GLONASS and BeiDou
Signal C/A, E1-DEF, R-C/A and B1-C/A
Remote command:
[:SOURce<hw>]:BB:GNPR:PRESet
on page 59
Save/Recall
Accesses the "Save/Recall" dialog, that is the standard instrument function for saving
and recalling the complete dialog-related settings in a file. The provided navigation
possibilities in the dialog are self-explanatory.
The filename and the directory, in which the settings are stored, are user-definable; the
file extension is however predefined.
The following file extensions are used:
*.gps
,
*.galileo
,
*.glonass
respectively.
Determines whether the instrument performs an absolute or a differential storing of the
settings.
Enable this function to accelerate the saving process by saving only the settings with
values different to the default ones.
Note: This function is not affected by the "Preset" function.
Remote command:
[:SOURce<hw>]:BB:GNPR:SETTing:CATalog?
on page 60
[:SOURce<hw>]:BB:GNPR:SETTing:DELete
on page 60
[:SOURce<hw>]:BB:GNPR:SETTing:LOAD
on page 60
[:SOURce<hw>]:BB:GNPR:SETTing:STORe
on page 61
[:SOURce<hw>]:BB:GNPR:SETTing:STORe:FAST
on page 61
Data List Management
Accesses the "Data List Management" dialog used to create and edit data lists.
All data lists are stored as files with the predefined file extension
*.dm_iqd
. The file-
name and the directory they are stored in are user-definable.
Note: All data lists are generated and edited by means of the
SOURce:BB:DM
subsys-
tem commands. Files containing data lists usually end with
*.dm_iqd
. The data lists
are selected as a data source for a specific function in the individual subsystems of the
digital standard.
GNSS Main Dialog