Rohde & Schwarz SMBV-P101, User Manual, Page: 121 / 131

Remote-Control Commands
R&S
®
SMBV-P101
106 User Manual 1176.9787.02 ─ 05
6.13 Clock Settings
[:SOURce<hw>]:BB:GNPR:CLOCk:MODE
....................................................................... 106
[:SOURce<hw>]:BB:GNPR:CLOCk:MULTiplier
................................................................. 106
[:SOURce<hw>]:BB:GNPR:CLOCk:SOURce
.................................................................... 106
[:SOURce<hw>]:BB:GNPR:CLOCk:SYNChronization:EXECute
..........................................106
[:SOURce<hw>]:BB:GNPR:CLOCk:SYNChronization:MODE
............................................. 107
[:SOURce<hw>]:BB:GNPR:CLOCk:MODE <Mode>
Enters the type of externally supplied clock (
[:SOURce<hw>]:BB:GNPR:CLOCk:
SOURce EXTernal
).
When
MCHip
is used, a multiple of the chip clock is supplied via the clock connector
and the chip clock is derived internally from this.
Use the command
[:SOURce<hw>]:BB:GNPR:CLOCk:MULTiplier
to set the multi-
plier.
Parameters:
<Mode> CHIP | MCHip
*RST:
CHIP
Manual operation: See "Clock Mode" on page 55
[:SOURce<hw>]:BB:GNPR:CLOCk:MULTiplier <Multiplier>
Specifies the multiplier for clock type "Multiplied" (
[:SOURce<hw>]:BB:GNPR:
CLOCk:MODE MCHip
) in the case of an external clock source.
Parameters:
<Multiplier> integer
Range:
1 to 64
*RST: 4
Manual operation: See "Clock Multiplier" on page 55
[:SOURce<hw>]:BB:GNPR:CLOCk:SOURce <Source>
Selects the clock source.
Parameters:
<Source> INTernal | EXTernal
*RST:
INTernal
Manual operation: See "Clock Source" on page 55
[:SOURce<hw>]:BB:GNPR:CLOCk:SYNChronization:EXECute
Performs automatically adjustment of the instrument's settings required for the selected
synchronization mode.
Clock Settings