manualshive.com logo in svg

Rohde & Schwarz SGU100A, User Manual, Page: 30 / 236

Share
Download
Rohde & Schwarz SGU100A User Manual Download Page 30

Instrument Tour

R&S

®

SGU100A

28

User Manual 1176.7726.02 ─ 09

3

 

Instrument Tour

The following topics help you get familiar with the instrument and perform the first
steps:

●

Front Panel Tour

●

Rear Panel Tour

This section explains the control elements and the connectors of the R&S

 

SGU with

the aid of the front and rear views. Specifications of interfaces can be found in the data
sheet.

3.1

 

Front Panel Tour

This section provides an overview of control elements on the front panel of the
R&S

 

SGU. The connectors of the R&S

 

SGU are placed on the rear panel and are

described in 

Chapter 3.2, "Rear Panel Tour"

, 

on page 30. As the R&S

 

SGU is inten-

ded to be remote-controlled, the front panel of the R&S

 

SGU contains no display but

mostly LEDs to inform you about the status of the instrument. The user interface can
be displayed on a remote PC station used to manually remote control the instrument.

Figure 3-1: Front panel view

[POWER ON /STAND BY]

The [POWER ON /STAND BY] key switches the instrument from the standby to ready
state or vice versa.

In ready state, the button is green. The instrument is ready for operation.

In standby state, the button is orange. In this state, it is safe to switch off the AC power
and disconnect the instrument from the power supply.

A blinking green color indicates that a booting operation is in process.

[RF ON]

Front Panel Tour

Summary of Contents for SGU100A













































































































































































































































Reviews:

No comments