Rohde & Schwarz RTM20 Series, User Manual, Page: 230 / 499

Data and File Management
R&S
®
RTM20xx
215 User Manual 1317.4726.02 ─ 01
13 Data and File Management
This chapter describes how to print screenshots and how to manage measurement set-
tings and data.
● Printing ..................................................................................................................215
● Saving and Loading ..............................................................................................217
13.1 Printing
You can create a sceenshot of the current display of your waveforms and measurement
results and print it on a printer. To optimize the output, you can configure different color
modes. The printer has to be connected to a Type A USB port. Alternatively, you can
save screenshots to files, see also:
​
chapter 13.2.5, "Screenshots" , on page 230.
If you want to print many screenshots, you can assign the printout function to the
PRINT key. This key is a shortcut key that initiates the assigned action at a single key-
press. Infrequent printouts can be started from the "File" menu, see also:
​
chap-
ter 13.1.1.3, "Quick Printing with the PRINT Key" , on page 216.
13.1.1 Printing a Screenshot
Before you can print, you have to:
●
Connect and configure the printer
●
Configure the PRINT key if you need quick printout
Then you can start the printout from the "File" menu or with the PRINT key.
13.1.1.1 Configuring the Printer Output
For the printout, you configure the format and colors. The individual settings are described
in
​
chapter 13.1.2, "Printer Settings" , on page 216.
1. Connect the printer to a Type A USB port on the front or rear panel of the instrument.
2. Press SETUP > "Printer" to open the "Printer" menu.
3. Press "Paper Format" and select the required format using the "Navigation" knob.
4. In the "Printer" menu, press "Color Mode".
5. Select the required color format using the "Navigation" knob.
6. Most printers support PCL (Printer Command Language). If your printer does not,
select the appropriate "Command Set".
Printing