VGA,
HDMI®
or DVI
LAN
¸RTB2000
digital oscilloscope
VGA,
HDMI®
or DVI
Ethernet
cable
¸RTB2000
digital oscilloscope
Ap
pl
ic
at
io
n C
ar
d |
V
er
si
on
0
1.
00
P
ro
je
ct y
ou
r o
sc
ill
os
co
pe s
cr
ee
n
w
ith di
sp
la
y o
ve
r L
AN
Pr
oject the screen content
The following instructions guide you through the steps
needed to project your oscilloscope’s screen content:
❙
Use an Ethernet cable to connect the oscilloscope to
either your local area network (LAN) or directly to your
PC (see figures on left)
❙
The LAN icon turns green once the oscilloscope obtains
the IP address from the network’s DHCP server. If your
network needs a predefined fixed IP address, please
contact your administrator to obtain one
The R&S®RTB2000 digital oscilloscope lets you share
your scope’s display with any computer/projector
via LAN or Internet. The oscilloscope comes with
an RJ-45 Ethernet jack and a built-in web server
(as standard). The screen is displayed via a direct
connection to a PC, via LAN or over the Internet.
Project your
oscilloscope screen
with display over
LAN
Connection via LAN
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI Logo are trademarks or registered trademarks of HDMI Licensing
LLC in the United States and other countries.
Direct connection to PC
❙
Touch the green LAN icon on the oscilloscope’s display
and select parameters to find the IP address. If you need
a fixed IP address, change the IPI mode to manual and
enter the specified IP address
RTB2000_Project_ac_en_3607-3239_92_v0100.indd 1
13.03.2017 13:33:07
