Safety Information
R&S
®
RT-ZF6
3
Manual 1326.3764.02 ─ 02
1
Safety Information
The product documentation helps you to use the product safely and efficiently.
Keep the product documentation nearby and offer it to other users.
Safety information warns you about the potential dangers and gives instructions
how to prevent personal injuries or damage caused by dangerous situations.
Throughout the documentation, safety instructions are provided when you need to
take care during setup or operation.
Intended use
The equipment under test (EUT) is a signal quality test and development board,
indented to be used at laboratory or test and measurement areas. These areas
are used for analysis, testing and servicing and where equipment is operated by
trained personnel (EN 61326-1, 3.9).
Operating site
Only use the product indoors, and keep it dry. The product has no casing and is
sensitive to moisture and humidity.
The product is suitable for pollution degree 2 environments where nonconductive
contamination can occur. For more information on environmental conditions such
as ambient temperature, see the specifications.
Installation
Connect only 1000BASE-T1 devices with the clock output according to the
1000BASE-T1 standard.
Electromagnetic emissions
The EUT is considered as a test probe, EN
61326-2-1, clause 5.2.4.101, note 1.
Therefore normal operation may increase emissions and/or reduce immunity in
certain applications.
The EUT is an EN 55011 class A equipment. Class A equipment is intended for
use in an industrial environment. There may be potential difficulties in ensuring
electromagnetic compatibility in other environments due to conducted as well as
radiated disturbances.
