Rohde & Schwarz R&S UPP, User Manual

Page: 764 / 938

Remote Control - Command Description
R&S
®
UPP
748 User Manual 1411.1055.32 ─ 10
●
DATA:FFT:Y<n3>?
on page 749
●
DATA:SWEep:COUNt:X<n4>?
on page 748
●
DATA:SWEep:COUNt:Y<n4>?
on page 748
●
DATA:SWEep:X<n3>?
on page 749
●
DATA:SWEep:Y<n3>?
on page 749
DATA:FFT:COUNt:X<n4>?
DATA:BARGraph:COUNt:X<n4>?
DATA:SWEep:COUNt:X<n4>?
Commands for reading out the number of X axis values of a sweep, an FFT or a bar-
graph
The example below is exemplary for the FFT and bar graph sub-systems.
Suffix:
<n4>
.
A channel need not be specified for reading out as there is only
one X axis for all channels. Specifying a channel is nonetheless
accepted as long as it is within the valid range.
Return values:
<argument> integer
Example:
DATA:SWEep:COUNt:X?
Reads out the number of X axis values from the sweep system.
Response:
100
Usage: Query only
DATA:FFT:COUNt:Y<n4>?
DATA:BARGraph:COUNt:Y<n4>?
DATA:SWEep:COUNt:Y<n4>?
Commands to read out the number of values on the Y axis of a sweep, an FFT or a
BARGraph.
The example below is exemplary for the FFT and BARGraph sub-systems.
Suffix:
<n4>
.
Channel 1 … 8
Return values:
<argument> integer
Example:
DATA:SWEep:COUNt:Y?
Reads out the number of Y axis values from the sweep system.
Response:
100
Usage: Query only
Triggering Measurements and Reading Results