Rohde & Schwarz R&S UPP, User Manual

Page: 590 / 938

Instrument Functions
R&S
®
UPP
574 User Manual 1411.1055.32 ─ 10
Number 0 means the most recent scan. The lower the negative number, the older the
scan.
5.47.4 Softkey Menu
Explanation of the individual menu items:
Level 1 Level 2 Brief description
"Close " Used to close the result list.
"Find Cursor " Used to adjust the display window
containing the result list so that
the data set appears together with
the cursor at the center of the dis-
play.
If both cursors are activated, this
button is used to toggle between
the two cursors.
"Selection "
Remote control command:
DISPlay:SWEep<n2>:DLISt:
FILTer
on page 799
The following values are listed in
the result list:
"All " All
"Lim upper " Only those values which over-
range the upper limit
"Lim lower " Only those values which under-
range the lower limit
"Lim upp&low " Only those values which over-
range the upper limit and under-
range the lower limit
"Harmonics " Only harmonics
"Peaks " Partial trace maxima
5.48 Numeric display
The numeric display provides a clear overview of max. 8 measurement results (two-
channel instruments) or max. 32 measurement results (multichannel instruments) from
max. four analyzer measurement functions from the Analyzer Function panel. If all of
the analyzer measurement functions are activated, the individual columns are assigned
the measurement functions in the following sequence (from left to right):
Measurement results for Analyzer Function, Level Monitor, Input Monitor, Freq/Phase.
Numeric display