Rohde & Schwarz R&S UPP, User Manual

Page: 255 / 938

Instrument Functions
R&S
®
UPP
239 User Manual 1411.1055.32 ─ 10
The button opens a browser in which you can select the equalizer file, refer also to
Chapter 5.7, "Equalization" , on page 279.
Remote command:
SOURce:VOLTage:EQUalize
on page 699
MMEMory:LOAD:OEQualize
on page 697
Equalizer Ch2
Equalizer for channel 2, if "Split" equalizer was selected.
The generator signal is equalized in the frequency domain using the file selected in the
""Equal File CH2"" parameter field. The checkbox enables or disables this function.
The equalization is the same for both channels.
The button opens a browser in which you can select the equalizer file, refer also to
Chapter 5.7, "Equalization" , on page 279.
Remote command:
MMEMory:LOAD:STEReo<n3>:OEQualize
on page 701
SOURce:VOLTage:STEReo<n3>:EQUalize
on page 703
DC Offset
A DC offset is superimposed on the generator signal. The DC offset decreases the
maximum AC voltage. The checkbox enables or disables this function. The value con-
figured for the offset voltage is always displayed.
Remote command:
SOURce:VOLTage:OFFSet<n3>:STATe
on page 700
DC Offset
The DC Offset can be selected for both channels together (Track) or separately (Split).
Remote command:
SOURce:VOLTage:OFFSet<n3>:CHANnels
on page 702
Offset Ch1
Common DC Offset for channel 1 and channel 2, if "Track" DC Offset was selected. DC
Offset for channel 1, if "Split" DC Offset was selected.
Remote command:
SOURce:VOLTage:OFFSet<n3>
on page 699
Offset Ch2
DC Offset for channel 2, if "Split" DC Offset was selected.
Remote command:
SOURce:VOLTage:OFFSet<n3>:STATe
on page 700
Generator Signals