Rohde & Schwarz R&S UPP, User Manual

Page: 160 / 938

Manual Operation
R&S
®
UPP
144 User Manual 1411.1055.32 ─ 10
4.8.1 Measurement Functions and Displaying Measurement Results
●
What (which measurement function) is measured and how (which measurement
method) measurement is performed, is preset in the "Analyzer Function" panel.
●
The configuration panels for measured value display are used to determine
how the measurement results are presented (i.e. which unit, how many digits, etc.).
A series of panels for the different measurement windows are provided for this pur-
pose.
●
The results are finally displayed in the various measurement windows .
The basic settings in these configuration panels and measurement windows are descri-
bed in the following sections. For a detailed description of the individual parameter
fields, see
Chapter 4.8.2, "Numeric Display Field" , on page 144 and Chapter 5.46,
"Curve, Spectrum and Bar Graph Display" , on page 499.
Figure 4-2: Measurements and display of results for audio analyzer
What is measured and how the measurement is performed: = Analyzer Function
Type of displays of measurement results
= Waveform Config
Display of measurement results = Numeric display and measurement graph
(here: waveform)
4.8.2 Numeric Display Field
The numeric display field provides a clear overview of the numeric values from various
analyzer functions and displays a maximum of 32 numeric value results from the "Ana-
lyzer
Function" panel. The individual columns are permanently assigned, from left to
right:
●
Column 1:
Measurement results of the function which is set in the "Analyzer Function" panel in
the "Function" field.
●
Column 2:
Measurement results for the set "Level Monitor" function.
Measurement Displays