Rohde & Schwarz R&S MDS-21, User Manual

Page: 25 / 30

R&S MDS-21 Preparing for Use
User Manual 1142.8407.04 - 02
E-10
4.5 Connecting the EUT
Place t
he EUT’s cable in the open absorbing clamp and use the two eccentric catches
to close the clamp (see Fig. 3 below).
Fig. 3 Positions of eccentric catches
The absorbing clamp side marked with
“EUT” must point towards the EUT.
4.6 Clamp Slide
The clamp has ball bearing rollers rated for manual or automatic operation on clamp
slides.
Fig. 4 shows the dimensions of the clamp slide and the guiding track for the
absorbing clamp.
Fig. 4 Dimensions of clamp slide
In this position, the absorbing clamp can be
opened.
In this position, the spring-loaded ferrite
holders are released. Use this position if the
absorbing clamp is not in use or during
transport.
In this position, the absorbing clamp is locked.