manualshive.com logo in svg

Rohde & Schwarz R&S LCX Series, User Manual

Share
Download
Rohde & Schwarz R&S LCX Series User Manual Download Page 151

Network operation and remote control

R&S

®

LCX Series

151

User Manual 1179.2260.02 ─ 02

Remote command: 

"SCPI Raw Port"

 

on page 150

Desired Hostname

Displays the hostname.

Each instrument is delivered with an assigned hostname, a logical name you can use
instead of the IP address.

With the default network settings, the IP address is allocated by the DHCP server. This
address can change each time the instrument is reconnected. Unlike the IP address,
the hostname name does not change.

Note: 

We recommend that you do not change the hostname to avoid problems with

the network connection. If you change the hostname, be sure to use a unique name.
How to: see 

"Assigning the SCPI raw port and hostname manually"

 

on page 162.

Remote command: 

SYSTem:COMMunicate:LAN:HOSTname

 

on page 218

DNS Hostname

Displays the 

DNS

 hostname.

The DNS host name is a unique designation for an instrument, composed of the host-
specific name and the domain name, separated by a "." (dot).

DNS Hostname

Displays the 

mDNS

 hostname.

10.3.2

 

LAN settings

Access:

1. Press the [settings] key at the front panel.

2. In the device settings menu, select "Interfaces".

3. Select "Network".

4. Select "LAN" .

Remote access settings

www.allice.de

Allice Messtechnik GmbH

Summary of Contents for R&S LCX Series



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands