manualshive.com logo in svg

Rohde & Schwarz R&S LCX Series, User Manual

Share
Download
Rohde & Schwarz R&S LCX Series User Manual Download Page 162

Network operation and remote control

R&S

®

LCX Series

162

User Manual 1179.2260.02 ─ 02

c) Confirm with 

.

The R&S

 

LCX changes the FTP port address accordingly.

Note: 

The FTP address settings are retained by an instrument preset, and also

when you recall previously saved instrument settings, see 

Chapter 9.12, "Save/

recall"

, 

on page 133.

However, a factory reset presets the FTP address to the default value, see 

"Reset-

ting the instrument to the initial factory settings"

 

on page 135.

Assigning the SCPI raw port and hostname manually

To assign the socket port and the instrument name manually:

1. Access: see 

149

2. Select "SCPI Raw Port".

The R&S

 

LCX opens an on-screen keypad to enter the port number.

3. Enter the port number, e.g., 

5025

.

4. Confirm with 

.

5. Proceed the same way to enter the hostname, e.g. 

LCX200-01

.

Assigning the IP address manually on the controller PC

► Obtain the necessary information from your network administrator. If you use more

than one LAN connector, you need separate address information for each connec-
tor.
For information on how to configure the LAN settings, refer to the documentation of
the operating system the PC uses.

Selecting the USB communication class protocol

A USB connection requires the VISA library to be installed. VISA detects and config-
ures the R&S instrument automatically when the USB connection is established. You
do not have to enter an address string or install a separate driver. It is assumed that
you have connected controller PC and the instrument, see 

"Establishing a USB remote

control connection"

 

on page 158

To install the driver and select the USB class:

1. Press the [settings] key at the front panel.

2. In the device settings menu, select "Interfaces" > "USB Class".

A selection dialog opens.

3. Select the communication protocol for the USB interface, e.g. "CDC".

4. Confirm your selection.

If you have changed the USB class, the R&S

 

LCX displays a message that

prompts you to reboot.

Adjusting interface addresses

www.allice.de

Allice Messtechnik GmbH

Summary of Contents for R&S LCX Series



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands