Rohde & Schwarz R&S FSP Series, Operating Manual

Page: 348 / 796

R&S FSP Instrument Functions
LO/IF ports for external mixers - Option R&S FSP-B21
4.276 Operating Manual 1164.4556.12 - 06
Remote command:
CORR:CVL:BIAS 7mA
See section “Bias Current” on page 4.270 .
Comment
The comment can be freely defined by the user. It may consist of a maximum of 60
characters. This field need not necessarily to be filled in.
Remote command:
CORR:CVL:COMMENT 'MIXER FOR BAND U'
FREQUENCY/CONV LOSS - Conversion loss table
The reference values must be entered in order of increasing frequencies. A maxi-
mum of 50 reference values can be entered.
Correction values for frequencies between the reference values are obtained by
interpolation. Linear interpolation is performed if the table contains only two values.
If it contains more than two reference values, spline interpolation is carried out.
Outside the frequency range covered by the table the conversion loss is assumed to
be the same (see illustration below) as that for the first and last reference value.
Remote command:
CORR:CVL:DATA 1MHZ,-30DB,2MHZ,-40DB
INSERT LINE The INSERT LINE softkey inserts a blank line at the cursor position. Subsequent
entries are shifted downwards by one line.
Remote command:
--
DELETE LINE The DELETE LINE softkey deletes the marked line in the reference value table.
Remote command:
--
SAVE TABLE The SAVE TABLE softkey stores the edited table on the hard disk under the name
given in the field NAME . The .ACL extension is automatically appended to the file
name.
Remote command:
--
Frequency qu
Conversion loss
outside the range
covered by the table
Con
ver
si
on
lo
ss
To
p l
imit
of
ta
b
le
Bot
to
m li
mi
t of
ta
b
le