manualshive.com logo in svg

Rohde & Schwarz R&S FSP Series, Operating Manual

Share
Download
Rohde & Schwarz R&S FSP Series Operating Manual Download Page 216

R&S FSP

Instrument Functions

Analyzer Mode

4.144

Operating Manual 1164.4556.12 - 06

NEXT RANGES

Scrolls through the sweep list in forward direction if more than 5 ranges are defined.
The first page shows Range 1 through 5, the second page shows Range 6 to 11 etc.

PREVIOUS

RANGES

Scrolls through the sweep list in backwards direction if more than 5 ranges are
defined. The first page shows Range 1 through 5, the second page shows Range 6
to 11 etc.

REFERENCE

RANGE

Opens a submenu to define additional parameters for the reference power measure-
ment.

POW REF

CHAN PEAK

Selects the type of power measurement in the reference range.

• Peak

Measures the highest peak within the reference range.

• Chan

Measures the channel power within the reference range (integral bandwidth 
method).

Remote command:

ESP:RTYP PEAK

TX

BANDWIDTH

Defines the bandwidth used for measuring the channel power. Possible values are
from 20 Hz to the span of the reference range.

Remote command:

ESP:BWID 20 HZ

RRC FILT
(ON OFF)

Activates or deactivates the RRC filter.

Remote command:

ESP:FILT:RRC:STAT ON

ALPHA BT

Sets the rolloff factor of the RRC filter.

Remote command:

ESP:FILT:RRC:ALPH 0.22

START MEAS

Starts the Spectrum Emission Mask measurement. In Single Sweep mode, the
R&S FSP automatically stops the measurement.

Remote command:

INIT:ESP

STOP MEAS

Stops the Spectrum Emission Maskj measurement.

Remote command:

ABOR

LIST EVAL

Opens a submenu to edit the list evaluation settings.

POW REF CHAN PEAK

TX BANDWIDTH

RRC FILT (ON OFF)

ALPHA BT

LIST EVAL (ON OFF)

MARGIN

Summary of Contents for R&S FSP Series





























































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands