Getting Started
R&S
®
Spectrum Rider FPH
67
User Manual 1321.1011.02 ─ 06.00
● Select "Yes" to perform the reset. During the reboot, it shows a corresponding
message.
● Select "No" to cancel the reset.
3.2.8
Connecting the R&S Spectrum Rider to a PC
The R&S Spectrum Rider comes with the R&S InstrumentView software package. This
software package features several tools that allow you to document measurement
results, create and edit the different datasets necessary for the instrument.
The .NET Framework 2.0 (or higher) is required to run the software properly.
You can set up a connection between the R&S Spectrum Rider and R&S Instrument-
View either via its
LAN port or its mini USB port
.
You have to install the R&S InstrumentView software on the PC before you are able to
establish a connection.
1. Run the CD-ROM delivered with the R&S Spectrum Rider.
2. Navigate to the "Software" section and start the setup file.
3. Follow the instructions on the screen.
Alternatively, you can download the latest R&S InstrumentView from the R&S
Spectrum Rider product homepage.
Firewall settings
If no connection can be established between the software and the R&S Spectrum
Rider after successful configuration, check the firewall settings on your PC.
3.2.8.1
LAN Connection
You can connect the R&S Spectrum Rider directly to the PC with a LAN cable. The
LAN port
is located behind a protective cap on the right side of the R&S Spectrum
Rider.
You can set up the LAN connection in the "Instrument Settings" dialog box.
Instrument Tour