Remote Commands
R&S
®
Spectrum Rider FPH
392
User Manual 1321.1011.02 ─ 06.00
Usage:
Event
DISPlay<1...2>:DATE:FORMat
<DateFormat>
This command sets the display date format.
The numeric suffix at DISPlay is irrelevant for this command.
Suffix:
<1...2>
.
1...2
Parameters:
<DateFormat>
DDMMyyyy | MMDDyyyy
*RST:
DDMMyyyy
Example:
DISP:DATE:FORM DDMMyyyy
13.6.10.4
Audio Settings
This chapter describes all commands to control the audio functions of the R&S Spec-
trum Rider.
List of commands
●
●
SYSTem:BEEPer:POVerload[:STATe]
●
●
SYSTem:AUDio:VOLume
<Volume>
This command sets the volume of the internal speaker.
Parameters:
<Volume>
Range:
0 to 1
*RST:
0.3
Example:
SYST:AUD:VOL 0.40
Sets the volume to 40%.
SYSTem:BEEPer:POVerload[:STATe]
<State>
This command turns the beeper on and off when battery has reached its low-level
state.
Parameters:
<State>
ON | OFF
*RST:
OFF
Example:
SYST:BEEP:POV ON
Activates the beeper state.
Remote Control - Commands
