Rohde & Schwarz R&S FPH, User Manual

Page: 305 / 484

Remote Commands
R&S ® Spectrum Rider FPH
300 User Manual 1321.1011.02 ─ 06.00
Parameters:
<State> ON | OFF
*RST:
ON
Example:
BAND:VID:AUTO OFF
Turns off video bandwidth coupling.
[SENSe:]BWIDth:VIDeo:AUTO
<State>
This command couples and decouples the video bandwidth to the resolution band-
width.
Parameters:
<State> ON | OFF
*RST:
ON
Example:
BWID:VID:AUTO OFF
Turns off video bandwidth coupling.
13.6.2.4 Performing and Triggering Measurements
The following commands control the actual measurement process, including trigger
functionality.
Performing the Measurement
The following commands initialize a measurement and setup the sweep.
List of commands
●
*WAI
on page 288
●
ABORt
on page 300
●
INITiate[:IMMediate]
on page 301
●
INITiate:CONTinuous
on page 301
●
[SENSe:]SWEep:COUNt
on page 301
●
[SENSe:]SWEep:POINts
on page 302
●
[SENSe:]SWEep:TIME
on page 302
●
[SENSe:]SWEep:TIME:AUTO
on page 302
ABORt
This command aborts the current measurement and resets the trigger system.
This command is an event and therefore has no query and no *RST value.
Example:
ABOR;
INIT:IMM
Aborts a measurement and starts a new one.
Usage: Event
Remote Control - Commands