Interference Analyzer
R&S
®
Spectrum Rider FPH
248
User Manual 1321.1011.02 ─ 06.00
2. Enter the "Name" or "Description" in the input field.
Displaying geotags
You can also display as many geotags as you want on the map. See
1. Select the "GPS Position" softkey.
2. Select the "GPS Position List" softkey.
The R&S Spectrum Rider opens the "GPS position list" dialog box.
3. Select the geotag you want to display or remove from the map.
The R&S Spectrum Rider highlights the geotag selected. See item 6 in
.
4. Select the "Include" softkey to check or uncheck the selected geotag.
The R&S Spectrum Rider displays or removes the geotag items accordingly on the
map.
11.3.5.2
Triangulation
With option R&S FPH-K15, the R&S Spectrum Rider is able to locate the source of
interference using the triangulation method.
To perform triangulation, you have to create at least two or three geotags with azimuth
information. After creating the geotags (see
). Based on these geotags, the R&S Spec-
trum Rider calculates the point at which the azimuth lines of the geotags intersect. This
intersection point represents the source of the interference.
If necessary, you can assign a different azimuth for the current position of GPS coordi-
nates.
1. Select the "GPS Position" softkey.
2. Select the "Save" softkey.
Working with Maps
