Interference Analyzer
R&S
®
Spectrum Rider FPH
230
User Manual 1321.1011.02 ─ 06.00
11
Interference Analyzer
R&S Spectrum Rider option
R&S FPH-K15 (order number: 1321.0715.02) option is required to operate the R&S
Spectrum Rider in the interference analysis mode.
R&S FPH-K16 (order number: 1321.0615.02)) option is required to operate the R&S
Spectrum Rider in the signal strength mapping mode.
In wireless systems, interference causes low data rates, dropped calls and poor voice
quality, often making it impossible to establish or maintain a connection.
Equipped with firmware option R&S FPH-K15 and R&S FPH-K16, you can track down
the source of interferences with your R&S Spectrum Rider. These options provide tools
and means to make the search for interferers as comfortable as possible.
To measure interferences, you need a directional antenna like the R&S HL300 (order
number 4097.3005.02), R&S HE300 (order number 4067.5900.02). or R&S HE400
(order number 4104.6000.02).
The interference analyzer provides several measurement modes.
11.1
Interference Analysis
In the interference analysis mode, you can perform both spectrogram and triangulation
measurement functions.
For more information, see
Working with the spectrogram display
Triangulation
If only R&S FPH-K15 is installed, the "Triangulation" measurement is available when
"MODE" key is pressed.
If both R&S FPH-K15 and R&S FPH-K16 are installed, the "Triangulation" measure-
ment is available when [MODE] key follow by "Maps" softkey is pressed.
See
Chapter 14.1.3, "Operating Mode Selection"
1. Press "Meas Mode" softkey if R&S FPH-K16 is installed.
2. Select the "Triangulation" menu item.
The R&S Spectrum Rider enters the triangulation measurement mode.
Chapter 11.3, "Working with Maps"
Interference Analysis
