Rohde & Schwarz R&S CMW-KM300, User Manual

Page: 292 / 388

NB-IoT Multi-Evaluation Measurement
R&S
®
CMW-KM300/-KS300
292 User Manual 1178.5689.02 ─ 06
<Offset1> I/Q origin offset limit for high TX power range
Range:
-256 dBc to 256 dBc
*RST: -24.2 dBc
Default unit: dBc
<Offset2> I/Q origin offset limit for intermediate TX power range
Range:
-256 dBc to 256 dBc
*RST: -19.2 dBc
Default unit: dBc
<Offset3> I/Q origin offset limit for low TX power range
Range:
-256 dBc to 256 dBc
*RST: -9.2 dBc
Default unit: dBc
Example: See Specifying Limits
Firmware/Software: V3.5.10
Manual operation: See "I/Q origin offset limit settings" on page 240
CONFigure:NIOT:MEAS<i>:MEValuation:LIMit:IBE <Enable>, <Minimum>,
<SCPower>, <IQImage>
Defines parameters used for calculation of an upper limit for the inband emissions, see
Chapter 3.3.6.4, "Inband Emissions Limits" , on page 241.
Parameters:
<Enable> OFF | ON
OFF : disables the limit check
ON : enables the limit check
*RST: ON
<Minimum> Range: -256 dB to 256 dB
*RST: -30 dB
Default unit: dB
<SCPower> Range: -256 dBm to 256 dBm
*RST: -57 dBm
Default unit: dBm
<IQImage> Range: -256 dB to 256 dB
*RST: -24.2 dB
Default unit: dB
Example: See Specifying Limits
Firmware/Software: V3.5.10
Manual operation: See "Inband emission limit settings" on page 242
Command Reference
深圳德标仪器
135-1095-0799