R&S OSP
Manual Operation
Manual Operation of the Modules
Quick Start Guide 1505.3896.62 - 14
72
4
Manual Operation
The model R&S OSP120 is the version in the R&S OSP family which is operated
remotely controlled. There are no keys and display on the front panel for manual
operation. If an R&S OSP150 is connected to this R&S OSP120, it is also controlled
from there.
The model R&S OSP130 is equipped with both display and front panel keys for manual
operation.
R&S OSP model
Manual operation ...
see Chapter
R&S OSP120 without display
... with monitor and keyboard (GUI)
R&S OSP130 with display
... direct control via front display and
panel keypad
R&S OSP120 and
R&S OSP130
... via LAN from a separate laptop or
PC (Web-GUI via VNC)
See the next chapter for manual operation modes.
4.1 Manual Operation of the Modules
“Manual operation” of the instrument functions is achieved by the OSP Panel or using
the graphical user interface (GUI) of the R&S OSP via Web-Browser (all models of the
R&S OSP family).
The model R&S OSP130 can be operated using the GUI together with a display and
keyboard.
The application OSP Panel runs on an external computer with Windows Operating
System. The external computer is connected to the R&S OSP via LAN network.
See
chapters 3.2
for installation and operation of the OSP Panel.
Information how to run the GUI via Web-Browser are provided
chapter 5.3
Details to the manual operation of the R&S OSP130 are given in
chapter 5.3
4.2 R&S OSP Setups
All setups which are necessary to perform in the Linux operating system, which is
integral part of the R&S OSP120 or OSP130, are to be done via external keyboard and
external monitor (not for OSP130).
See
chapter 2.7.2
of this manual for how to connect these accessories.
Chapter 2.10
Summary of Contents for OSP-B011
Page 132: ......
