Safety and regulatory information
R&S
®
NRPM
9
Mannual 1425.8663.02 ─ 08
1
Safety and regulatory information
The product documentation helps you use the product safely and efficiently. Fol-
low the instructions provided here and in the following chapters.
Intended use
The R&S
NRPM OTA power measurement solution is intended for accurate
power measurements in production, R&D and calibration labs, and for installation
and maintenance tasks. Observe the operating conditions and performance limits
stated in the data sheet.
Target audience
The target audience is developers and technicians. The required skills and expe-
rience in power measurements depend on the used operating concept.
The R&S
NRPM OTA power measurement solution is designed for use in
anechoic environments as RF shielded boxes or benchtop applications in RF test
chambers. You can use it for Over-the-Air (OTA) beamforming verification in 5G,
WLAN IEEE 802.11ad and IEEE 802.11ay and the calibration of the transmit
antenna output power.
Where do I find safety information?
Safety information is part of the product documentation. It warns you of potential
dangers and gives instructions on how to prevent personal injury or damage
caused by dangerous situations. Safety information is provided as follows:
●
In
Chapter 1.1, "Safety instructions"
on page 9. The same information is
provided in many languages as printed "Safety Instructions". The printed
"Safety Instructions" are delivered with the product.
●
Throughout the documentation, safety instructions are provided when you
need to take care during setup or operation.
1.1
Safety instructions
Products from the Rohde
&
Schwarz group of companies are manufactured
according to the highest technical standards. To use the products safely, follow
Safety instructions
