Operating Basics
R&S
®
NGA100
28
User Manual 5601.8919.02 ─ 03
5
Operating Basics
5.1
Display Overview
The following displays the screen layout of R&S NGA100. It shows the output voltage,
current level and status bar information of the instrument.
Figure 5-1: Screen layout of R&S NGA100 for two-channel and single channel display
1 = Device status bar
2 = Channel status bar
3 = Channel display area
4 = Channel history information
5.1.1
Status Bar Information
There are two types of status bar. One shows device status information and the other
shows the individual channel status information.
Device status bar
Table 5-1: Status bar function
Function
Description
EasyArb
Arbitrary output sequences on Ch 1.
If in use, the icon is highlighted in green.
If enabled, the icon is highlighted in white else it shows gray.
EasyRamp
Output voltage to ramp continuously within a 10 ms to 10 s until set volt-
age, V
set
.
If in use for any channel, the icon is highlighted in green else it shows
gray.
Display Overview
