Rohde & Schwarz M3SR Series 4100, Service Manual, Page: 122 / 138

R&S M3SR Series 4100 HF Transceivers Front Panel - Removal and Installation
6124.9007.82.01 5.22
5.10 Front Panel - Removal and Installation
5.10.1 Removal of Front Panel (A10)
To remove the Front Panel (A10) from the R&S M3SR Series 4100 150 W HF Transceiver proceed as
follows (see also Fig. 5.13):
1. Take off the bottom cover of the R&S M3SR Series 4100 150 W HF Transceiver as described in
5.1 - Disassembly.
2. Disconnect the ribbon cable W30 from connector X260 at the Motherboard.
3. If installed, remove the R&S GB 4000C Comfort Control Unit from the R&S M3SR Series 4100
150 W HF Transceiver as described in 5.8 - Removal and Installation.
4. Undo and remove the twelve screws fixing the Front Panel (A10) to the cha
s
sis.
5. Carefully pull the Front Panel (A10) to the front and off.
Fig. 5.13 Removing the Front Panel (A10)
ICN-S4100-A-E11100-R-D0894-00123-A-01-1