Rohde & Schwarz FSW13, User Manual

Page: 649 / 1150

Network and Remote Operation
R&S
®
FSW
649 User Manual 1173.9411.02 ─ 19
10.4.1 General Network Settings
The R&S FSW can be operated in a local area network (LAN), for example to control
the instrument from a remote PC or use a network printer.
The general network settings are defined in the "Network" tab of the "N
Remote" dialog box.
Risk of network problems
All parameters can be edited here; however, beware that changing the computer name
has major effects in a network.
For details, see
chapter 10.5, "How to Set Up a Network and Remote Control" ,
on page 657.
Computer Name ..........................................................................................................649
IP Address ...................................................................................................................649
Subnet Mask ............................................................................................................... 650
DHCP .......................................................................................................................... 650
Network Configuration .................................................................................................650
Computer Name
Each instrument is delivered with an assigned computer name, but this name can be
changed. The naming conventions of Windows apply. If too many characters and/or
numbers are entered, an error message is displayed in the status line.
IP Address
Defines the IP address. The TCP/IP protocol is preinstalled with the IP address
10.0.0.10. If the DHCP server is available ("DHCP On"), the setting is read-only.
Network and Remote Control Settings