Data Management
R&S
®
FSW
564
User Manual 1173.9411.02 ─ 19
Install Printer
Opens the standard Windows dialog box to install a new printer. All printers that are
already installed are displayed.
Only user accounts with administrator rights can install a printer.
For further information refer to the Microsoft Windows documentation.
8.5.2 How to Store or Print Screenshots of the Display
► If the R&S
FSW has already been set up according to your current requirements,
simply press the "Print immediate" icon (
) at the far right end of the toolbar.
A screenshot of the current measurement display is printed or stored to a file, as
configured.
To set up screenshot outputs
This configuration assumes a printer has already been installed. To install a new
printer, use the
1. Select the "Printer" tool in the toolbar.
2. Select the "Device Setup" softkey.
3. Select the tab for Device 1 or Device 2 to configure a device.
4. To set up the print function to store a screenshot to a file, select the required file
format as the output medium.
To set up the print function to store a screenshot to the clipboard, select "Clip-
board" as the output medium.
To set up the print function to print a screenshot on a printer, select "Printer" as the
output medium and an installed printer from the "Name" list.
5. For printout, select the page orientation.
6. Optionally, deactivate the date and time or the logo so they are not added to the
screenshot.
7. Select "OK" to close the "Device Setup" dialog box.
8. Toggle the "Device" softkey to the device configuration you want to use.
9. Optionally, configure the colors to be used for printout, e.g. as displayed on the
screen instead of inversed.
10. Optionally, add a comment to be included with the screenshot.
11. Select the "Print Screen" softkey or the "Printer" or "Screenshot" tool in the toolbar
to execute the print function and check the results.
12. If you configured the print function to store the screenshot to a file, enter a file
name in the file selection dialog box.
Creating Screenshots of Current Measurement Results and Settings
