Rohde & Schwarz FSW13, User Manual

Page: 448 / 1150

Common Analysis and Display Functions
R&S
®
FSW
448 User Manual 1173.9411.02 ─ 19
Fig. 7-4: Multiple zoom
Using the zoom area to restrict a peak search
The selected zoom area can be used to restrict the search range for a peak search,
but only in single zoom mode (see
"Using Zoom Limits" on page 501).
7.2.2 Zoom Functions
The zoom functions are only available from the toolbar.
Single Zoom ................................................................................................................ 448
Multiple Zoom ..............................................................................................................448
Restore Original Display ............................................................................................. 449
Deactivating Zoom (Selection mode) .......................................................................... 449
Single Zoom
A single zoom replaces the current diagram by a new diagram which displays an
enlarged extract of the trace. This function can be used repetitively until the required
details are visible.
Remote command:
DISPlay[:
​
WINDow<n>]:
​
ZOOM:
​
STATe
​
on page 907
DISPlay[:
​
WINDow<n>]:
​
ZOOM:
​
AREA
​
on page 907
Multiple Zoom
Zoomed Displays