R&S FSH
Interference Analyzer (R&S FSH-K15/ -K16)
Working with Maps
Operating Manual 1173.6275.12 - 30
163
5.2.3.4 Selecting Colors for Geotags and Measurement Locations
For more information on geotags (R&S FSH-K15 and -K16) in general see "
For more information on measurement locations (R&S FSH-K17) in general see
"
Collecting Measurement Data (R&S FSH-K17)
Default behavior of geotags (R&S FSH-K15 and -K16)
By default, all geotags (including all the labels associated with that geotag) have the
same color (black). Depending on the type of geotag, you can assign different colors to
the geotags.
Note that changing the color of a geotag in the interference analyzer (R&S FSH-K15)
also changes the color of the azimuth line.
Default behavior of measurement locations (R&S FSH-K17)
Your current position is represented by a black cross-hairs. When you do a
measurement at that location, and save the results, a colored dot is added to the map.
The color represents the signal level at that location:
● Red dot: Signal recepetion is bad.
● Yellow dot: Signal reception is OK.
● Green dot: Signal reception is good.
Color of your current position (R&S FSH-K15 and -K16)
To emphasize your current position, you can define a different color to that geotag.
► Press the "Settings" softkey.
► Select the "Current Position Color" menu item.
The R&S FSH opens a submenu to select the color.
► Select one of the colors available in the submenu.
The R&S FSH applies the color as selected.
Color of previous positions (R&S FSH-K15)
In the Interference Analyzer (R&S FSH-K15), you can distinguish between your current
position and positions that you have visited (or saved) earlier.
► Press the "Settings" softkey.
► Select the "Saved Position Color" menu item.
The R&S FSH opens a submenu to select the color.
► Select one of the colors available in the submenu.
The R&S FSH applies the color as selected.
In addition to the geotag, you can also define a custom color for the triangulation
results. The R&S FSH displays triangulation results as circle with a dot in the middle.
By default, the circles and dot are blue. You can change the color of those as follows.
