Rohde & Schwarz FPL1000 Series, User Manual

Page: 794 / 899

Remote Commands
R&S
®
FPL1000
794 User Manual 1178.3370.02 ─ 03
Manual operation: See " Items: " on page 105
MMEMory:SELect:CHANnel[:ITEM]:LINes:ALL <State>
MMEMory:SELect[:ITEM]:LINes:ALL <State>
This command includes or excludes all limit lines (active and inactive) when storing or
loading a configuration file.
Parameters:
<State> ON | OFF | 1 | 0
*RST:
0
Example: MMEM:SEL:LIN:ALL ON
Manual operation: See " Items: " on page 105
MMEMory:SELect:CHANnel[:ITEM]:NONE
MMEMory:SELect[:ITEM]:NONE
This command does not include any of the following items when storing or loading a
configuration file.
●
Hardware configuration:
MMEMory:SELect[:ITEM]:HWSettings
●
Limit lines:
MMEMory:SELect[:ITEM]:LINes:ALL
●
Spectrogram data:
MMEMory:SELect[:ITEM]:SGRam
●
Trace data:
MMEMory:SELect[:ITEM]:TRACe[:ACTive]
●
Transducers:
MMEMory:SELect[:ITEM]:TRANsducer:ALL
Example: MMEM:SEL:NONE
Usage: Event
Manual operation: See " Items: " on page 105
MMEMory:SELect:CHANnel[:ITEM]:SPECtrogram <State>
MMEMory:SELect:CHANnel[:ITEM]:SGRam <State>
MMEMory:SELect[:ITEM]:SPECtrogram <State>
MMEMory:SELect[:ITEM]:SGRam <State>
This command includes or excludes spectrogram data when storing or loading a con-
figuration file.
Parameters:
<State> ON | OFF | 1 | 0
*RST:
0
Example: MMEM:SEL:SGR ON
Adds the spectrogram data to the list of data subsets.
Manual operation: See " Items: " on page 105
Managing Settings and Results