Rohde & Schwarz FPL1000 Series, User Manual

Page: 792 / 899

Remote Commands
R&S
®
FPL1000
792 User Manual 1178.3370.02 ─ 03
Parameters:
<State> You do not have to use the parameter. If you do not include the
parameter, the command returns a list of all drives in use.
This is the same behavior as if you were using the parameter
OFF.
ON | 1
Returns a list of all drives in use including the folder information.
OFF | 0
Returns a list of all drives in use.
Usage: Query only
MMEMory:RDIRectory <Directory>
This command deletes the indicated directory.
Parameters:
<Directory> String containing the path of the directory to delete.
Note that the directory you want to remove must be empty.
Usage: Event
8.9.2 Selecting the Items to Store
The following commands select the items to be included in the configuration file.
Depending on the used command, either the items from the entire instrument
(
MMEMory:SELect[:ITEM]...
), or only those from the currently selected channel
setup (
MMEM:SELect:CHANnel[:ITEM]...
) are stored.
MMEMory:SELect:CHANnel[:ITEM]:ALL
...........................................................................793
MMEMory:SELect[:ITEM]:ALL
......................................................................................... 793
MMEMory:SELect:CHANnel[:ITEM]:DEFault
.....................................................................793
MMEMory:SELect[:ITEM]:DEFault
................................................................................... 793
MMEMory:SELect:CHANnel[:ITEM]:HWSettings
............................................................... 793
MMEMory:SELect[:ITEM]:HWSettings
..............................................................................793
MMEMory:SELect:CHANnel[:ITEM]:LINes:ALL
................................................................. 794
MMEMory:SELect[:ITEM]:LINes:ALL
................................................................................794
MMEMory:SELect:CHANnel[:ITEM]:NONE
....................................................................... 794
MMEMory:SELect[:ITEM]:NONE
..................................................................................... 794
MMEMory:SELect:CHANnel[:ITEM]:SPECtrogram
............................................................ 794
MMEMory:SELect:CHANnel[:ITEM]:SGRam
.....................................................................794
MMEMory:SELect[:ITEM]:SPECtrogram
...........................................................................794
MMEMory:SELect[:ITEM]:SGRam
................................................................................... 794
MMEMory:SELect:CHANnel[:ITEM]:TRACe[:ACTive]
........................................................ 795
MMEMory:SELect[:ITEM]:TRACe[:ACTive]
.......................................................................795
MMEMory:SELect:CHANnel[:ITEM]:TRANsducer:ALL
....................................................... 795
MMEMory:SELect[:ITEM]:TRANsducer:ALL
......................................................................795
Managing Settings and Results