Rohde & Schwarz FPL1000 Series, User Manual

Page: 309 / 899

The Spectrum Application (RF Measurements)
R&S
®
FPL1000
309 User Manual 1178.3370.02 ─ 03
Power Reference Type .............................................................................................. 309
Channel Power Settings .............................................................................................309
└ Tx Bandwidth ............................................................................................... 309
└ RRC Filter State ...........................................................................................309
└ Alpha: ...........................................................................................................310
Power Reference Type
Defines how the reference power is calculated.
"Channel Power"
Measures the channel power within the reference range using the
integration bandwidth method. Additional settings can be configured
for this method.
"Peak Power"
Determines the peak power within the reference range.
Remote command:
[SENSe:]ESPectrum<sb>:RTYPe
on page 580
Channel Power Settings
If the "Power Reference Type:" "Channel Power" was selected, additional parameters
can be configured.
Tx Bandwidth ← Channel Power Settings
Defines the bandwidth used for measuring the channel power, with:
Minimum span ≤ "Tx Bandwidth" ≤ of reference range
Remote command:
[SENSe:]ESPectrum<sb>:BWID
on page 579
RRC Filter State ← Channel Power Settings
Activates or deactivates the use of an RRC filter.
Remote command:
[SENSe:]ESPectrum<sb>:FILTer[:RRC][:STATe]
on page 579
Measurements and Results