Rohde & Schwarz FPL1000 Series, User Manual

Page: 102 / 899

Common Instrument Functions
R&S
®
FPL1000
102 User Manual 1178.3370.02 ─ 03
"Instrument
with all Chan-
nels" The instrument settings for all currently active "Channel" s are stored.
"Current Chan-
nel" Only the instrument settings for the currently selected measurement
"Channel" s are stored.
Recall
Restores the instrument settings as saved in the selected settings file. If the settings
file contains settings for a specific "Channel" only, a new channel setup with the stored
settings is activated, otherwise all "Channel" s and instrument settings are overwritten
with the stored settings.
Note: After you use the "Recall" function, the history of previous actions is deleted, i.e.
any actions performed previously cannot be undone or redone using the UNDO/REDO
keys.
Note: If a channel setup with the same name as the "Channel" to be restored (in a new
"Channel" ) is already active, the name for the new channel setup is extended by a
consecutive number:
In remote commands, you must append this number to the channel setup name, as
well.
Remote command:
MMEMory:LOAD:STATe
on page 796
6.2.2.2 Configurable Storage and Recall
The more sophisticated storage and recall functions allow you to define which settings
are stored, and where the settings file is stored to. Any settings file can be selected for
recall.
● Stored Data Types ................................................................................................ 102
● Storage Location and Filename ............................................................................ 103
● Save and Recall Dialog Boxes ..............................................................................103
● Startup Recall Settings ..........................................................................................106
Stored Data Types
The following types of data can be stored to and loaded from files via the "Save" dialog
box on the R&S
FPL1000:
Table 6-1: Items that can be stored to files
Item Description
Current Settings Current instrument and measurement settings.
All Transducers All transducer factor files .
(Note: Restoring a saveset overwrites transducer factor files on the hard disk
that have the same name as those in the saveset. For more information, see
"Saving and recalling transducer and limit line settings" on page 100.)
All Traces All active traces.
Data Management