Rohde & Schwarz FPC Series, User Manual

Page: 401 / 419

Function Reference
R&S
®
FPC
398 User Manual 1178.4130.02 ─ 07
20.8.2 Frequency Menu
Access : [Freq]
Start Distance ..............................................................................................................398
Stop Distance ..............................................................................................................398
Center Frequency ....................................................................................................... 398
Start Frequency ...........................................................................................................398
Stop Frequency ...........................................................................................................398
Signal Standard ...........................................................................................................398
Start Distance
See "Defining the cable length" on page 179.
(Distance to fault measurements only.)
Remote command:
CALCulate<n>:DTF:DISTance:STARt
on page 326
Stop Distance
See "Defining the cable length" on page 179.
(DTF measurements only.)
Remote command:
CALCulate<n>:DTF:DISTance:STOP
on page 326
Center Frequency
See "Defining a center frequency" on page 94.
Remote command:
[SENSe:]FREQuency:CENTer
on page 248
Start Frequency
See "Defining a start and stop frequency" on page 97.
Remote command:
[SENSe:]FREQuency:STARt
on page 251
Stop Frequency
See "Defining a start and stop frequency" on page 97.
Remote command:
[SENSe:]FREQuency:STOP
on page 251
Signal Standard
See "Working with channel tables" on page 97.
(Not for distance to fault measurements.)
Remote command:
Input mode:
[SENSe:]FREQuency:INPut:MODE
on page 249
Channel table (DL):
[SENSe:]CHANnel:TABLe:SELect:DOWNlink
on page 246
Channel table (UL):
[SENSe:]CHANnel:TABLe:SELect:UPLink
on page 246
Function Reference: Vector Network Analyzer