Rohde & Schwarz FPC Series, User Manual

Page: 395 / 419

Function Reference
R&S
®
FPC
392 User Manual 1178.4130.02 ─ 07
Remote command:
Filter state:
[SENSe:]DDEMod:FILTer[:STATe]
on page 319
Filter type:
[SENSe:]DDEMod:FILTer:NAME
on page 319
Symbol rate:
[SENSe:]DDEMod:SRATe
on page 320
Alpha / BT:
[SENSe:]DDEMod:FILTer:ALPHa
on page 318
Number of symbols:
[SENSe:]DDEMod:TIME
on page 320
Burst processing:
[SENSe:]DDEMod:BURSt[:STATe]
on page 318
Standard
See "Selecting a standard" on page 166.
Remote command:
not supported
Eye Diagram
See "Selecting the result display" on page 160.
Remote command:
CALCulate<n>:FEED
on page 313
Symbols
See "Selecting the result display" on page 160.
Remote command:
CALCulate<n>:FEED
on page 313
Modulation Depth / Modulation Deviation
See "Selecting the result display" on page 160.
Remote command:
CALCulate<n>:FEED
on page 313
Modulation Error
See "Selecting the result display" on page 160.
Remote command:
CALCulate<n>:FEED
on page 313
20.7.2 Frequency Menu
Access : [Freq]
Center Frequency ....................................................................................................... 392
Center Freq Step Size .................................................................................................393
Frequency Offset .........................................................................................................393
Center Frequency
See "Defining a center frequency" on page 94.
Remote command:
[SENSe:]FREQuency:CENTer
on page 248
Function Reference: Digital Demodulation