Preparing for use
R&S
®
FE50DTR
16
Manual 1179.3180.02 ─ 02
► Connect the DC power cable to the socket of the power supply connector.
Only use the DC power cable delivered with the R&S
FE50DTR.
If connected to power, the R&S
FE50DTR is switched-on automatically. On
the front panel of the R&S
FE50DTR, the "Power" LED switches from gray to
provides an overview on power states.
Table 4-1: Overview power states
LED
Power state
gray
Power Off
green
Power On
Required ratings of the DC input level and maximum current are listed next to the
socket and in the data sheet.
4.7
Connecting to LAN
Network environment
Before connecting the product to a local area network (LAN), consider the follow-
ing:
●
For internet or remote access, use secured connections if applicable.
●
Ensure that the network settings comply with the security policies of your com-
pany. Contact your local system administrator or IT department before con-
necting your product to your company LAN.
●
When connected to the LAN, the product may potentially be accessed from
the internet, which may be a security risk. For example, attackers might mis-
use or damage the product.
To connect to LAN
The connector is located on the rear panel of the R&S
FE50DTR.
► Connect the LAN socket via an RJ-45 cable to the LAN.
Connecting to LAN
