Preparing for use
R&S
®
FE50DTR
14
Manual 1179.3180.02 ─ 02
● The overall load on the lowest instrument must not exceed 250
N.
3.
NOTICE!
Overheating can damage the product.
Prevent overheating as follows:
● Keep a minimum distance of 3
cm between the fan openings at the front
panel and at the rear panel of the R&S
FE50DTR and any object in the
vicinity.
● Do not place the R&S
FE50DTR next to heat-generating equipment such
as radiators or other instruments.
See also
Chapter 4.9, "Connecting the R&S
4.5
Considerations for test setup
Cable selection and electromagnetic interference (EMI)
Electromagnetic interference (EMI) can affect the measurement results.
To suppress electromagnetic radiation during operation:
●
Besides the cables delivered with the R&S
FE50DTR, use high-quality shiel-
ded cables for the following connector types:
– SMA: RF cables that match this connector type.
How to:
Chapter 4.8, "Connecting to SMA and 1.85
– LAN: at least CAT6+ cables.
How to:
Chapter 4.7, "Connecting to LAN"
– USB: double-shielded USB cables. The length of passive USB cables
must not exceed 1
m.
Considerations for test setup
