Remote Control Commands
R&S
®
EX-IQ-BOX
254
User Manual 1409.5570.32 ─ 05
subsequently used in the
MMEM:STOR:STATe<number>
,
<file>
command. Also, sub-
sequently to loading a file with instrument settings with command
MMEM:LOAD:STAT
<number>
,
<file>
, these settings have to be activated with the common command
*RCL <number>
.
Example:
In this example, the current instrument setting is always stored in the file
test1.savrcl
in the directory
user
on the internal hard disk.
*SAV 4
MMEM:STOR:STAT 4,"d:\user\test1.savrcl"
If the complete path including the drive letter is specified, the file is stored in the specified
path.
MMEM:MSIS 'D:'*SAV 4
MMEM:STOR:STAT 4,"\user\test1.savrcl"
If the parameter only contains the path and file name, the default drive set with the
MMEM:MSIS
command is effective.
9.2.5.2
Extensions for User Files
The following table list all available file extensions for user files. The currently available
files on the instrument depend on the installed options.
Table 9-1: List of the automatically assigned file extensions in R&S
DigIConf
Function/Digital
Standard
List type
Contents
File suffix
CPRI
Settings
CPRI configuration, vendor data included
Instrument settings
*.cpri
Waveform
Waveforms and multi segment waveforms
*.wv
User Defined
Settings
User Defined Protocol configuration
*.iqbox
Configuration Soft-
ware
Settings
R&S
DigIConf settings
*.savrcl
9.2.5.3
Remote Control Commands
.................................................................................................255
...............................................................................................256
MMEMory:CATalog?
Returns the content of the current or a specified directory.
R&S EX-IQ-BOX - Remote Control Commands
Summary of Contents for EX-IQ-BOX
Page 147: ...Protocol Settings R S EX IQ BOX 132 User Manual 1409 5570 32 05 CPRI...
Page 391: ......
