Rohde & Schwarz ESW Series, User Manual

Page: 86 / 759

Applications
R&S
®
ESW
86 User Manual 1177.6298.02 ─ 08
8 Applications
The R&S ESW provides several applications for different analysis tasks (for example
the Receiver application or the I/Q Analyzer). When you activate an application, the
R&S
ESW creates a new measurement channel which in turn determines the mea-
surement settings for that application. You can use the same application with different
measurement settings by creating several channels for the same application. Each
channel is represented by a separate tab on the screen.
Note that the number of channels may be limited by the available memory of the
R&S
ESW.
Switching between applications
When you enter another application for the first time, a set of selected parameters is
passed on from the current application to the other one, for example the measurement
frequency or the attenuation. Thus, you can switch between applications quickly and
easily.
You can also define a fix set of parameters that are synchronized between applica-
tions. For more information see
Chapter 13.7, "Synchronizing Measurement Channel
Configuration" , on page 347.
● R&S MultiView ........................................................................................................ 86
● Available Applications ............................................................................................. 87
● Starting an Application ............................................................................................ 89
● Running a Sequence of Measurements ..................................................................90
8.1 R&S MultiView
Each application is displayed in a separate tab. An additional tab ("MultiView") provides
an overview of all currently active channels at a glance. In the "MultiView" tab, each
individual window contains its own channel bar with an additional button. Select this
button to switch to the corresponding channel display quickly.
R&S MultiView