Remote Control
R&S
®
ESRP
955
User Manual 1175.7445.02 ─ 08
<Label>
string
This parameter defines the label of the user-definable softkey.
*RST:
User<Softkey_number>
Example:
MMEM:USER1 'C:\MySaveSets\Set1','Set1'
Loads settings file
Set1
when the "Set1" softkey in the "User"
menu is selected.
Example:
MMEM:USER3 'C:\MySaveSets\Set3',''
Loads settings file
Set3
when the "User3" softkey in the "User"
menu is selected.
11.15
Network Connection
Configuring Network Connections
.........................................................................955
.................................................................................... 958
11.15.1
Configuring Network Connections
.................................................................................... 955
...............................................................................................955
.............................................................................. 956
.................................................................................. 956
SYSTem:COMMunicate:GPIB[:SELF]:ADDRess
............................................................... 957
SYSTem:COMMunicate:GPIB[:SELF]:RTERminator
.......................................................... 957
............................................................................................. 958
MMEMory:NETWork:DISConnect
<Drive>
This command disconnects the selected drive.
Parameters:
<Drive>
Example:
MMEM:NETW:DISC 'T:'
Disconnects network drive T:
Usage:
Event
Manual operation:
See
MMEMory:NETWork:MAP
<Drive>, <HostName> [, <UserName>, <Password>][,
<Reconnect>]
This command maps a drive to a server or server directory of the network.
Network Connection
