Rohde & Schwarz ESRP Series, User Manual

Page: 748 / 1094

Remote Control
R&S
®
ESRP
745 User Manual 1175.7445.02 ─ 08
MMEMory:STORe<n>:LIST <FileName>
This command stores the current list evaluation results in a
<file name>.dat
file.
The file consists of a data section containing the list evaluation results.
Suffix:
<n>
.
irrelevant
Parameters:
<FileName> <file name>
Example: MMEM:STOR:LIST 'test'
Stores the current list evaluation results in the
test.dat
file.
Manual operation: See "Save Evaluation List" on page 240
See "ASCII File Export" on page 240
See "Save Evaluation List" on page 269
See "ASCII File Export" on page 269
CALCulate<n>:ESPectrum:PSEarch|:PEAKsearch:[IMMediate]
This command starts the list evaluation.
Suffix:
<n>
.
Selects the measurement window.
Example: CALC:ESP:PSE
Usage: Event
CALCulate<n>:ESPectrum:PSEarch|:PEAKsearch:AUTO <State>
This command activates or deactivates the list evaluation.
Suffix:
<n>
.
Selects the measurement window.
Parameters:
<State> ON | OFF
*RST:
ON
Example: CALC:ESP:PSE:AUTO OFF
Deactivates the list evaluation.
CALCulate<n>:ESPectrum:PSEarch|:PEAKsearch:MARGin <Margin>
This command sets the margin used for the limit check/peak search.
Suffix:
<n>
.
Selects the measurement window.
Parameters:
<Margin> -200 to 200 dB
*RST:
200 dB
Remote Commands in Spectrum Analyzer Mode