Rohde & Schwarz ESRP Series, User Manual

Page: 176 / 1094

Receiver Mode
R&S
®
ESRP
173 User Manual 1175.7445.02 ─ 08
LISN Type ................................................................................................................... 173
Prescan Phase ............................................................................................................173
Final Test Phase ..........................................................................................................173
150 kHz Highpass Filter .............................................................................................. 174
LISN Type
Selects the V-network to be controlled via the user port.
For more information see Chapter 5.2.5, "V-Networks Control (LISN)" , on page 149.
Remote command:
For the scan:
INPut:LISN[:TYPE]
on page 655
For the final measurement:
[SENSe:]FMEasurement:LISN[:TYPE]
on page 654
Prescan Phase
Selects the phase of the network you want to control during the scan.
During the scan, you can control more than one phase at a time.
For more information see Chapter 5.2.5, "V-Networks Control (LISN)" , on page 149.
Remote command:
INPut:LISN:PHASe
on page 655
Final Test Phase
Selects the phase of the network you want to control during the final measurement.
During the final measurement you can control more than one phase.
For more information see Chapter 5.2.5, "V-Networks Control (LISN)" , on page 149.
Remote command:
[SENSe:]FMEasurement:LISN:PHASe
on page 653
Common Measurement Settings